One person’s picks, and how to get them. I write with AI as my assistant: it drafts, I choose the items and decide what’s said.AI drafts as my assistant; the picks and decisions are mine.

Plarail Grip Mascon E5 & E6 Shinkansen Set

Drive the green E5 Hayabusa with a hand controller, then reverse it to join the red E6 Komachi, and all six cars run as one train.

  • Age 3 and up
  • Floor space about 134 × 48 cm (52.8 × 18.9 in), laid out as shown on the box
  • Power 3 batteries (1 AA + 2 AAA), not included
  • Keep in mind Batteries not included

By Sakinome in Okayama, Japan No one pays to be listed here How I pick

Why I picked it

I picked it for an E5 Hayabusa and E6 Komachi fan, or a child who loves these Shinkansen (bullet trains) of northern Japan. With the controller, you’re the driver: choose the speed, stop at a station, then reverse and join the two.

Joining the trains is the part to look forward to, and once the trigger rail is set, it’s done with the controller, without touching the cars. That’s also why I chose this set: the two E5 Hayabusa Grip Mascon sets from 2023 (the train on its own and the DX Set) have no E6 and no trigger rail in the box.

  • Six speed steps. Push the handle forward to go faster; pull it back to slow down and stop. Keep holding it back and the train reverses.
  • Batteries only. There’s no plug or charger, so it works the same in any country.
  • The motor unit fits other Plarail trains. The maker calls it the Grip Mascon IR chassis. It fits under many other Plarail train bodies, sold separately, so a train you already have can become the one you drive. The maker has a list of which ones (PDF, in Japanese).

Keep in mind

Not for: anyone who wants both trains to move on their own. Only the green E5 has a motor.

  • Safety: small parts and magnets. The maker says never to give it to children under 3. The couplers (the hooks that join two trains) are magnets, so keep them away from TVs, watches and computers. If a magnet is swallowed, see a doctor at once.
  • You’ll need a Phillips screwdriver. The batteries go in behind a screw, on the train and on the controller. Use alkaline batteries only; the maker says never to use rechargeable ones.
  • The manual is in Japanese, and only online. It’s a PDF on the maker’s site, not a paper copy in the box. The joining steps are under Details below. The maker’s customer service only helps people who bought the set in Japan and contact it from Japan.
  • It needs floor space. Laid out as shown on the box, the track covers this much:

    Dashed: a sheet of printer paper (about A4 / US letter), drawn to the same scale.

  • Already have Plarail track? The manual says not to use the R-14 and R-16 point rails or the R-19 automatic turnout while the two trains are joined. A train can’t climb a slope in reverse, and reversing again and again may make some cars come off the track.

Details

In the box
Two three-car trains, the controller, a trigger rail, 8 straight rails, 3 half-length straight rails, 9 curved rails, a right-hand turnout rail, a buffer stop, 3 stations and a sheet of stickers.
Model
990598. Japanese name: Kimi ga Unten! Renketsu! Grip Mascon (“You drive! Connect! Grip Mascon”). On Amazon Japan the title is worded differently, but the product description uses this name.
Maker
Takara Tomy, licensed by JR East.
Released
October 18, 2025.
How it works
The controller works by infrared, like a TV remote: point it at the train. It reaches up to about 200 cm (79 in) in a straight line. Tunnels and stations can block it, and direct sunlight or fluorescent lights nearby can confuse it.
Joining
Set the trigger rail’s lever to UP and reverse the E5 over it: the coupler comes out, and magnets join the trains when they meet. Going forward over the rail doesn’t bring it out. A lever on the last car brings the coupler out by hand, or puts it away.
Two trains at once
A second Grip Mascon train, sold separately, can run at the same time. Each train and controller is set to channel A or B, and a pair only works when both are on the same channel.
The real trains
The green E5 Hayabusa runs on the Tohoku Shinkansen, Tokyo to Shin-Aomori, and on to Shin-Hakodate-Hokuto on the Hokkaido Shinkansen. The red E6 Komachi has run on the Akita Shinkansen, Tokyo to Akita, since March 2013. Both have a top speed of 320 km/h (about 200 mph) in service; the Komachi runs that fast only on the Shinkansen part of its trip. Between Tokyo and Morioka, the Komachi usually runs joined to a Hayabusa.
Sources
Takara Tomy’s product page (Japanese) · the online manual (PDF, Japanese) · Takara Tomy’s 2023 Grip Mascon announcement (PDF, Japanese) · Wikipedia on the Komachi.

Questions

Can the Komachi be the one you drive?
Yes. You can swap the bodies of the two front cars, so the motor unit carries the Komachi’s front car instead.
Does it switch itself off?
Yes. After about 10 minutes with nothing pressed, the train goes to sleep. To wake it, turn the power switch under the train off, then on again.